Are you struggling to find the safest device that will improve your car handling, enhance the incorrect offset, or enhance its appearance?
Think about a moment when you are driving your truck at top speed but still makes stable and comfortable turns without any worry. Do you see how that driving experience would make your life much more relaxed and enjoyable?
That is possibly not the situation now. Many people think they cannot achieve this level of efficiency due to technological limitations. They consider that it is normal for drivers to struggle a little bit or slow down as if they want to stop for them to negotiate sharp corners safely and comfortably.
The good news, however, is that we can overcome these problems by doing one necessary thing. Use the right wheel spacers. But are wheel spacers safe? You may be asking this question now for good reasons.
There are many misleading myths around wheel spacers, but the truth is that they are completely safe when properly installed. Read on for simple tricks on how you can safely install your tire spacers and change your driving experience without spending a lot of your hard-earned money.
Wheel spacers effectively create more space for the wheels of vehicles, which makes the wheels to move further apart. This is what helps to enhance their stability. How does this happen? It helps to distribute the weight equally on all the wheels.
Wheel spacers also set the wheels of cars forward as they increase the space. Engineers will tell you that this fixes new rims that cannot fit well due to incorrect size.
What’s more, when you install a wheel spacer, they make the wheels push outside. This gives your vehicle a better appearance and improves its handling too.
These are the reasons you need a wheel spacer. Only remember that how you take care of your vehicle and wheel spacers reap all these benefits.
When you are looking for the right wheel spacers for your trucks, bear in mind that these are heavy-duty vehicles. Size is critical here. So, be careful to know the bolt pattern, the quality of the tread, and the diameter of the hub that will serve you best. The studs have large holes.
If you care about how your truck will look as you cruise the highway, you need to choose wheel spacers that will give you masculine, aggressive, or classic appearance. Many car owners are highly interested in this.
For truck drivers who care about having an aggressive look, we would recommend supreme suspension hub centric wheels spacers, ECCPP Wheel spacers Jeep Liberty Wrangler Cherokee, and Rugged ridged anodized wheel spacer, among others. With these options, you will not be asking, “Are wheel spacers safe?”
Due to the numerous benefits of wheel spacers, you cannot afford to stay without learning how to install them. The good news is that once you buy the right one, you are able to do the rest of the work alone if you follow the tips below.
One thing that you should know before you start is that there are two types of wheel spacers. You may find a spacer that simply slides onto the hub. Alternatively, you may use the option that bolts to the studs of your vehicle’s wheels. Many call the latter bolt-on spacers, as they have another unique set of studs.
However, despite the type of spacer that you choose, you will find the installation process quite simple. Only do the following and keep driving safely.
Step 1
Park your car on a safe, level surface. Once you have done that, loosen the lug nuts to be able to remove the wheel from the hub. Consequently, slide your floor jack beneath your vehicle and appropriately jack it up. Starting from one corner, you should lower the car onto the stand of the jack.
Turn to each of the remaining corners and repeat the above process until the jack stand supports all of them.
Step 2
Slide your wheels off the hub. Now be sure no lug nuts are yet to be removed by sliding the wheels appropriately. Spray degreaser on your lug studs and then wipe them with a clean rag. However, remember that you can use a wire brush to clean up the threads if you notice that they are filthy. Be sure you wipe down the surface of the hub as well to make it easy for you to install the wheels when the time for that comes.
Step 3
If your spacer is not the bolt-on type, slide your spacer onto the studs. Use the wheel studs now to line up the holes in the space and then slide it securely over the slides. If your vehicles in one of those that use lug bolts that thread into the hub, line it up with the hub holes.
Step 4
If your wheel spacer is a bolt-on type, place it onto the studs, then go ahead and bolt the spacer on to the hub.
Note that you can get the bolts at your auto parts stores if, by any chance, they are not with the spacer. Follow the outlined specifications to tighten the nuts that hold your wheel spacer.
Step 5
Ensure the wheel sits firms against the spacer by carefully sliding it onto the lug studs. Use your lug wrench to install your lug bolts or lug nuts and tighten them.
Step 6
Remove the jack stand by sliding your floor jack under the vehicle and lifting it. Lower each of the corners of the car to the ground. Of course, you need to do this one at a time. That is all you need to do and avoid unnecessary pressure.
Are Wheel Spacers Safe?
If you want to know whether wheel spacers are safe, before anything else, you may need to consider that they are always on the top of the mind of most drivers who want to widen the track of their vehicles securely. There is a good reason for this. The demand directly corresponds with the benefits, including safety.
Why are some people complaining about it? For you to benefit from tire spacers, you must ensure you properly fit them onto your wheels. Often, many people get it wrong from the onset when they think that the brand of their products is the real deal.
When people fail to give the installation process adequate attention, they, unfortunately, set themselves up for failure.
As such, the simple answer to the question of whether tire spacers are safe is a resounding ‘yes.’ They are safe.
Do Wheel Spacers Affect Alignment?
No, wheel spacers have nothing to do with alignment. This is particularly true if you follow the right procedure to install them on all your four wheels. Only mount on some and ignore others for the best experience.
Can Wheel Spacers Cause Problems?
Yes, it is evident by now that wheel spacers can cause problems if you install them wrongly. Some of the potential issues that you may face are heavier steering, additional wear and tear, and some alignment issues.
Do Wheel Spacers Improve Handling?
Yes, wheel spacers improve handling — many people who want to improve vehicle stability, particularly when turning or cornering, choose spacers for this reason.
Do Wheel Spacers Cause Vibration?
No, wheel spacers themselves do not cause vibration as some think. All it does is increase the sensitivity of vehicles to pre-existing imbalance or other problems. This way, it helps you to know when to act to avoid them from worsening.
| Exterior |
| Wheels & Tires |